Whirlpool Washer F9E1 Error in Amboy, WA
If your Whirlpool washer in Amboy is stopping with water in the drum and F9E1 on the display — F21 on older models — it has a long-drain fault: the washer is emptying too slowly. This code is one of the regulars we see in Amboy — and most of the time it is the drain filter, not a dead pump.
Book a Service Call
$89 service call — credited toward your repair. No hidden fees, ever.
- BBB Accredited Business · A+ Rating
- EPA 608 Certified
Quick checks before you call:
- Unplug the washer and have a shallow pan and towels ready. The filter is behind the lower front panel or a small access door, depending on the model.
- Unscrew the filter slowly — water will come out — and clean it.
- Check the drain hose behind the washer for kinks and the standpipe for clogs.
- Refit the filter and run Drain & Spin empty. If F9E1 returns and the pump is silent, the pump motor has likely failed — that is repair work, and we can do it on site for most Whirlpool models.
When it is a pro job: a failed drain pump, or F9E1 that comes back with a clean filter and a working pump. A pump replacement typically runs $260–$440 in parts and labor. Our service call in Amboy is $89, credited toward the repair, and the repair is covered by a 90-day warranty. Call (360) 667-1567.
Full step-by-step guide: Whirlpool Washer F9E1 Error — full guide
For all washer repairs in town: Washer Repair in Amboy
Our work in Amboy
What we've repaired in Amboy
| Refrigerators & freezers | 38 |
| Ovens, ranges & cooktops | 25 |
| Washers | 17 |
| Dishwashers | 14 |
| Dryers | 11 |
Where we've worked in Amboy
Each pin marks a street where we completed appliance repairs. House numbers are never shown, for our customers' privacy.
Book service in Amboy
$89 service call, credited toward the repair. 90-day warranty.
Appliance Service Pro LLC · 105 West Main Street Unit 211, Battle Ground, WA 98604 · WA Contractor License #APPLISP749PG